Our Premium Starter Kit contains everything you need to get you started creating your own lash extensions, presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased separately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
our Premium Starter Kit which contains everything you need to get you started creating your own lash extensions presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased seperately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
our Premium Starter Kit which contains everything you need to get you started creating your own lash extensions presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased seperately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
our Premium Starter Kit which contains everything you need to get you started creating your own lash extensions presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased seperately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
our Premium Starter Kit which contains everything you need to get you started creating your own lash extensions presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased seperately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
our Premium Starter Kit which contains everything you need to get you started creating your own lash extensions presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased seperately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
our Premium Starter Kit which contains everything you need to get you started creating your own lash extensions presented in a stunning gift bag. This is a perfect gift for a friend or family.
This package contains enough lashes for 7.5 sets of lashes, which are of course reusable
Kit Contains:
1 x Black Collections Ribbon (Length & style of your choice)
1 x Bond’Em and Seal’Em Duo
1 x Remove’Em
1 x Pink Lash Applicator
1 x Pink Pair of Scissors
1 x Spoolie
1 x Micro swab
1 x Instruction Card
1 x Gift Bag
COLLECTIONS RIBBONS:
Curl: ‘D’ CURL
Band: THIN BLACK BAND
The Lash Ribbons Collections are the perfect way to start getting creative with your lash ribbons. We have 3 collections available
SHORT – 1 x 8mm, 1 x 10mm, 1 x 12mm
MEDIUM – 1 x 10mm, 1 x 12mm, 1 x 14mm
LONG – 1 x 14mm, 1 x 16mm, 1 x 18mm
They are the ultimate in allowing you to create your own set of lashes that no-one else will be wearing but they will all be talking about and wanting! Whether you want to add as segments, double segments, strip lashes or just a small cluster to give an added lift to your own lashes, the choice is yours. You simply trim the ribbon to the size you want, ensuring that you cut off any excess band, and then apply to your own lashes using our Lash Bond Glue (needs to be purchased seperately) to create a set of unique styled lashes that will stay on for 10-14 days.
These are the next best thing to professionally applied eyelash extensions.
BOND’EM AND SEAL’EM
This is our newest product – the Seal ‘Em and Black Bond ‘Em Duo – each side contains 4ml of the corresponding product
BOND’EM BLACK LASH BOND
This bonding glue has been manufactured in China and should be used in conjunction with our Lash Ribbons. Depending upon your application method you will achieve anywhere from 5-7 days wear. This should be applied to your lashes and brushed only onto the base of your lashes using the small bent mascara type wand, you can of course brush on top of the lash too. Apply only a small area at a time and you only need to wait 20-30 seconds before applying the lash as that is when the bond will be at it’s best tack. Once the lashes are in place, using our lash applicators clamp the lashes to your own lashes, by doing so this will increase the bond. Use within 3 months after opening.
As with any new adhesive product we always suggest that a patch test be carried out behind the ear 24 hours prior to application
- LATEX FREE
- NON TOXIC
- NOT TESTED ON ANIMALS
- WATER RESISTANT
- SUITABLE FOR SENSITIVE EYES
INGREDIENTS:
Acrylates Copolymer, 6-4% Water 35%, C177266 1%
SEAL’EM
The sealant will remove any stickiness and will also increase the longevity of wear.
Once the bond has set if you find that the Lash Bond remains sticky after applying (this is not the case for everyone), then our Lash Sealant will take away that residual stickiness. Once you have applied the Lash Bond and have achieved your finished look, after finally clamping your lashes in place then apply directly to the area you have applied the bond and allow to dry. The lash sealant has a thin elongated mascara wand with ball tip end for ease of use.
Ingredients:
Acrylates/Ethylthexy Acrylate Copolymer, Water, Butylene Glycol, Ethanol, Carbon Black, AMP-Acrylates Copolymer, Phenoxyethanol, Citria Acid, Sorbitol, Ceteareth-25, Sodium Carbonate, Ethyhexylglycerin
AS WITH ANY NEW PRODUCT, WE ALWAYS ADVISE A PATCH TEST PRIOR TO USING. IF IRRITATION OCCURS CEASE USE IMMEDIATELY
REMOVE’EM
When I first used this product on TikTok I was amazed by how easily and effectively it worked. Whether you have been wearing your Lash Ribbons for one day or two weeks all you need to do is apply the remover on to the area where the lash bond has been applied both on top and underneath the lashes, leave it to soak into the lashes and then using the applicator, gently remove the lashes. There should be no resistance, if the lashes do not come away easily, then apply more of the solution and leave for a longer period of time. Once removed, the segments can then be cleaned and reused.
INGREDIENTS: White mineral oil, Laureth-4, Isododecone, 2- phenoxyethanol ,Tween 80, Ethyl hexyl glycerol, Propylene glycol
Subscription will automatically renew every month before you unsubscribe.
- 1000+ embedded vimeo player sites supported
- Support video downloading in more resolutions e.g. 4k, 2k, 1080p, etc.
- Support for downloading private videos
- Support for extracting audio
- Support for downloading subtitles
- Unlimited downloads
Click here to get other payment method
Tip：Please refresh the page after the payment is successful
What is the payment method you want？
We will gradually support it
Reviews
There are no reviews yet.